#GPK – Extreme Positioning.

Seagull #GPK is a high precision single band GNSS receiver which can operate in multiple modes in order to give you the utmost flexibility and precision for your UAV platform! #GPK is capable of tracking the following satellite signals – GPS L1C/A, GLONASS L1OF, BEIDOU B1I.

Multiple modes – Real Time Kinematic, Post Processed Kinematic, Moving Baseline
High refresh rate – 4Hz MB, 5Hz RTK, 10Hz RAW, 10Hz GNSS
High position accuracy – up to 1 cm!
Easy configuration – via SD card
Two operational modes – BASE or ROVER
On-board PPK logging, #MAP-X2 compatible, Multiple Flight Controllers supported

#GPK RTK/PPK/MB SOLUTION

Representation of two #GPK modules operating in RTK mode with #RADIO modules used for data transmission

What it does

Seagull #GPK supports the following functions

BASE / ROVER ( #GPK can operate either as a BASE or ROVER )
RTK ( Real Time Kinematic navigation for your drone and logging – at 5Hz )
PPK ( Post Processed Kinematic BASE logging and ROVER logging+navigation with #MAP-X2 – at 10Hz )
MB ( Moving Baseline navigation and logging, requires 2 x #GPK modules – at 4Hz )
GNSS ( Non-Kinematic mode navigation and logging – at 10Hz )

What it supports

The following hardware is supported

Flight Controllers:

Pixhawk 1
Pixhawk 2.1
Pixracer
APM 2.6
APM 2.5

– all of the ardupilot based FCs’ are supported as well any FC that is capable of utilizing UBX/NMEA messages for navigation

Seagull:

#RADIO
#MAP-X2

What you get

The following is part of this product

1 x Seagull #GPK
1 x GPS antenna for #GPK
1 x 16GB micro SD card ( w. fullsize adaptor )

– all the support you could wish for !

Specifications

Details for Seagull #GPK

Ublox NEO-M8P-2 GNSS receiver. Supports following signals L1C/A, L1OF, B1I – GPS/GLONASS/BEIDOU
Refresh rate: up to 10Hz
Voltage: 3.9 – 12V (5 volts recommended – do NOT exceed 12V!)
Current draw: 80mA MIN, 100mA AVERAGE, 120mA MAX
Dimensions: 45mm x 41mm x 11mm
Weight: 16g

Mapping Receiver

Seagull #GPK RTK/PPK/MB GNSS Receiver