The 030/8: 2x 200A PDB is a high-performance Power Distribution Board (PDB) designed for Pixhawk 2.1 (The Cube) and other flight controllers. It features a built-in 2x 200A hall sensor, Sensor Hub X2, and a 4-14S HYB-BEC, making it an ideal choice for high-current UAV applications.

This advanced PDB integrates a main power switch, allowing users to connect the main batteries and warm up the Cube and GPS lock without powering all other equipment. Once ready, a simple press of the switch activates the full system, ensuring a smooth and safe power-up sequence that protects ESCs and onboard electronics.

With a continuous current handling of 400A and peak support of 1200A for 1 second, this compact yet powerful PDB is designed for UAVs with an AUW of up to 50kg. The package includes pre-soldered 8AWG cables, 3.5mm bullet connectors, and AMASS / AS150 connectors for easy integration into drone systems.

All-in-one PDB for Pixhawk 2.1 (The Cube) and any other flight controller via an adapter cable. With an integrated 2x200A hall sensor, Sensor Hub X2, 4-14S HYB-BEC, and most importantly a main power switch with a continuous current of 400A. The outputs are over 3.5mm banana connectors, plus spare BEC connectors after the switch and before the switch.

This design lets you connect the main batteries to heat up the Cube and get GPS lock without powering up all the rest of the equipment. When ready, just press the power switch and fly.

Protect your ESC’s and other equipment due to smooth power-up from GND.

Recommended maximum AUW of UAV = 50kg.

Specifications:

Input 2x 4-14S (absolute max.60V) with transient spikes of max. 62V.

2x 200A = 400A (continues) 1,200A @ 25’C for 1sec.

Hub X2 can be deactivated for single battery usage.

5.3V / 3A power supply for Flight Controller

2x 20cm 8AWG input cables (red/black)

Only 75 x 49 x 27mm -> 110g (without cables)

Salient Features:

All-in-One Power Distribution Board – Designed for Pixhawk 2.1 (The Cube) and other flight controllers via an adapter cable.
Integrated 2x 200A Hall Sensor – Provides precise current monitoring for enhanced system management.
High Current Handling – Supports 400A continuous current, with a peak capacity of 1200A for 1 second at 25°C.
Built-in Sensor Hub X2 – Can be deactivated for single battery operation, offering flexible power management.
Supports 4-14S Batteries – Max input voltage of 60V with transient spikes up to 62V.
Main Power Switch for Safe Power-Up – Allows pre-flight system warm-up without activating all components.
Optimized for Cleaner Builds – Reduces wiring clutter for a more organized and efficient UAV setup.
5.3V / 3A Power Supply for Flight Controller – Ensures stable power delivery to critical systems.
Compact and Lightweight Design – 75 x 49 x 27mm, weighing only 110g (without cables).

Product Highlights:

✔ Designed for Pixhawk 2.1 & Other Flight Controllers
✔ Dual 200A Sensors for Accurate Current Monitoring
✔ Supports UAVs with AUW up to 50kg
✔ Pre-Flight Battery Warm-Up Without Powering All Equipment
✔ High-Quality 8AWG Input Cables for Reliable Power Flow
✔ Includes 3.5mm Bullet Connectors & AMASS / AS150 Connectors

Scope of delivery:

1x PDB with soldered-on input wires (2x 20cm 8AWG)

1x 042: PL – FC cable for Pixhawk 2.1 (The Cube)

20x 3.5mm bullet connectors (male)

2x 26cm Red/Black shrinking tube

2 pairs AMASS / AS150 connector

flight controller PDB

030/8: 2x 200A PDB / 4x 20cm 8AWG in india