The 031/8 PC 2x 200A PDB is a high-performance Power Distribution Board (PDB) designed for Pixhawk 2.1 (The Cube) and other flight controllers via an adapter cable. It features a built-in 2x200A hall sensor, Sensor Hub X2, and 4-14S HYB-BEC, ensuring a stable and efficient power supply for UAV systems.

Its integrated main power switch allows you to connect the main batteries and preheat the Cube and GPS lock without activating all other equipment. When ready, a simple press of the switch powers up the entire system, providing a smooth and safe power-up sequence that protects ESCs and onboard electronics.

With a maximum continuous current of 400A and peak handling of 1200A for 1 second, this compact and lightweight PDB (75 x 49 x 27mm, 110g) is ideal for UAVs with an AUW of up to 50kg. The package includes pre-soldered 8AWG cables, 3.5mm bullet connectors, and AMASS / AS150 connectors for easy integration.

All-in-one PDB for Pixhawk 2.1 (The Cube) and any other flight controller via an adapter cable. With an integrated 2x200A hall sensor, Sensor Hub X2, 4-14S HYB-BEC, and most importantly a main power switch with a continuous current of 400A. The outputs are over 3.5mm banana connectors, plus spare BEC connectors after the switch and before the switch.

This design lets you connect the main batteries to heat up the Cube and get GPS lock without powering up all the rest of the equipment. When ready, just press the power switch and fly.

This new PC Series PDB includes two fully redundant BEC’s with POWER1 and POWER2 for the FC. A higher output current of 2x 5A per BEC. Fully redundant power supply for the PDB control circuit… etc.

Less wiring = Cleaner builds

Protect your ESC’s and other equipment due to smooth power-up from GND.

Specifications:

Input 2x 4-14S (max.65V) with transient spikes of up to 85V.

2x 200A = 400A (continues) 1,200A @ 25’C for 1sec.

Hub X2 can be deactivated for single battery usage.

2x 5.3V / 5A power supply for Flight Controller

2x 20cm 8AWG input cables (red/black)

Only 75 x 49 x 27mm -> 112g (without cables)

Recommended maximum AUW of UAV = 50kg

Salient Features:

All-in-One PDB – Designed for Pixhawk 2.1 (The Cube) and other flight controllers via an adapter cable.
Integrated 2x200A Hall Sensor – Provides accurate current measurements.
Main Power Switch – Supports 400A continuous current for smooth power management.
Supports 4-14S Batteries – Max input voltage of 60V with transient spikes up to 62V.
Cleaner Builds with Less Wiring – Reduces clutter and improves efficiency.
Smooth Power-Up from GND – Protects ESCs and other equipment from power surges.
Supports UAVs up to 50kg AUW – Suitable for heavy-duty applications.
5.3V / 3A Power Supply for Flight Controller – Ensures stable power delivery.
Compact & Lightweight – 75 x 49 x 27mm, weighing only 110g (without cables).

Product Highlights:

✔ Optimized for Pixhawk 2.1 & Other Flight Controllers
✔ Dual 200A Sensors for Precise Current Monitoring
✔ Built-In Sensor Hub X2 for Single or Dual Battery Usage
✔ 400A Continuous, 1200A Peak Current Handling
✔ Main Power Switch Allows Pre-Flight System Warm-Up
✔ High-Quality 8AWG Input Cables for Reliable Power Flow
✔ Includes 3.5mm Bullet Connectors and AMASS / AS150 Connectors

Scope of delivery:

1x PDB with soldered-on input wires (2x 20cm 8AWG)

1x 060: Power-Cube / Pixhawk 2.1 cable (The Cube)

1x 061: Power-Cube / Pixhawk 2.1 Backup cable

20x 3.5mm bullet connectors (male)

2x 26cm Red/Black shrinking tube.

2 pairs AMASS / AS150 connector

flight controller power board

031/8: PC 2x 200A PDB / 4x 20cm 8AWG in India